MW MOBILE WITNESS

Xr4 Embedded/Mobile Digital Recorder

Features

  • MPEG-4 Technology for Video Compression
  • Removable HDD
  • External EDGE/GPRS/CDMA/WIFI Modules for Wireless Transmission
  • Stand Alone NON-PC Embedded Operation System (RTOS) Provides Maximum Stability
  • High Quality MPEG-4 Video Recording and Playback at Full Frame Rate (30FPS)
  • 4 Channels Video and Audio Recording Simultaneously
  • Built-in GPS Allows for Vehicle Tracking and Location Recording in Video Field
  • Compact Flash Card (CFC) Can Be Used for Software Upgrades and Uploading Advertising Clips to the MDR
  • Two USB Connectors, Allows Laptop Connection to Download & Upload Data
  • Special Anti-Vibration System
  • Station Announcement Automatically

System
OS Linux (providing standalone stable operating system)
Operating Interface Hand-held, IR controller with On-Screen Display (OSD) for all operations of the MDR
Storage 60, 80, 120 and 160 GB (2.5 in. mobile anti-vibration and shock resistance HDD support)
Signal System NTSC/PAL
Input Voltage 12-volt DC or 24-volt DC (can range from 8V-55V DC)
Video
Camera Input Up to 4 cameras
Display 4 Video Window Screens
Image Quality 8 – level adjustable
Fwd/Playback speed x2, x4, x1/2, x1/4
Stream Standard ISO1449
Record Resolution CIF (352×288 pixels for PAL, 360×240 pixels for NTSC), 1/2D1
(704×288 pixels for PAL, 720×240 pixels for NTSC),
D1 (720×576 pixels for PAL, 720×480 pixels for NTSC)
Image Compression 12.5K-112.5KB/s, 25-150KB/s
Max FPS 200 / 240 FPS (25/30 FPS/CH at CIF, 12.5/15 FPS/CH at HD1,
Display Res. 6.25/7.5 FPS/CH at D1)
TV Monitor 704×576 pixels for PAL at D1 / 720×480 pixels for NTSC at D1, VGA output 720×576 pixels for PAL at D1 / 704×480 pixels for PAL at D1
Audio
Audio Input 4 (stereo)
Audio Output 2 (stereo)
Audio Compression ATPCM
I/O Interface
TV-OUT 2 Composite Outputs with BNC connectors
VGA 1(d-SUB 15 pins)
LAN 1(RJ-45) 10M/100M Ethernet connector
USB 2, support USB OTG Technology (USB2.0)
Serial RS-485×3, RS-232×2
Network
Protocol TCP/IP
Alarm
Input 8 input sensors
Multi-mode Auto-reset after power-break, auto-alarm when missing signal input,
Camera Cover alarm
Power Requirement
Ignition Switch Device operate once ignition power on/auto shutdown delay after
Power Consumption Average 15W
Power Adapter 8-55V DC. Typical 12V DC @ 5A, 24V @ 3A
Physical Characteristics
Height 59.3 mm (2,33”)
Width 247.5 mm (9.74”)
Depth 175.4 mm (6.9 in)
Weight 4.5 kg (9.92 lb)
Value-added Function
Mobile Entertaining Auto-play Advertisement, Movie, Music
Motion Detection Each channel up to 192 detection zone, sensitivity adjustable
Record Mode Manual, continuous, schedule, event, motion detection and pre-event recording
Others
HDD HDD Bay – 1 IDE HDD, FAT32 format
Storage Mode 2.5” HDD
Time Clock Built-in clock, perpetual calendar
GPS Function Optional for built-in module with GPS antenna
Wireless Communication EDGE/GPRS/CDMA wireless transmission
Data R/W mode FIFO
Time Synch GPS Time Synch / NTP (Network Time Protocol) Time Synch via network connection
Environment
Operating Temperature -45°C – 65°C / -59-149°F(w/o HDD), 0~65°C / 32-149°F (w HDD)
Relative Humidity ≤80%
Vibration Resistance < 2 Grms
Shock Resistance < 1,200 Grms


Click here to download PDF